YOUR FREE TEMPERATURE CONTROL SOLUTION CONSULTANT!
APPLICATION
DEHUMIDIFYING DRYER APPLICATION
Dehumidification and defoaming of plastic raw materials
In the plastic processing industry, the product will appear shrinkage, silver, bubbles, cracks, flow marks, poor transparency and so on. The main cause of these undesirable qualities is that the plastic has not been sufficiently dried before it has been set up.Since the moisture penetrates into the inside of the plastic granules, the conventional hot air dryer cannot be completely dry the engineering plastic raw materials such as PA, PET, PC, PBT, CA and the like.It has been proved by practice that reducing the dew point of dry air to below -40 C while controlling the heat to blow it over the surface of the wet plastic particles can reduce the moisture content to below 0.02% before molding.The three-machine integrated dehumidifying dryer can fully dehumidify and heat the air in a closed circulation system, and the dry air rapidly precipitates the moisture in the plastic particles to achieve the effect of dehumidifying and drying.Moreover, dry air can quickly precipitate the moisture in the plastic granules to achieve the effect of dehumidifying and drying.

Related Products

Product Inquiry

KEEP IN TOUCH

 NO.188 danghu road,linhu town,wuzhong district,suzhou city,jiangsu province,China.
 +86-18550003508
 Mobile:  +86-0512-68017763

 Fancy@ndetated.com
 FAX:  +86-0512-68017793
 WHATSAPP:  +86-18068000020

SUBSCRIBE

© 2019 NDT Machinery (Suzhou)Co.,Ltd. All rights reserved.