YOUR FREE TEMPERATURE CONTROL SOLUTION CONSULTANT!

Ndetated Extrusion Line Dehumidification Dryer

Average dew point:≤-40℃
Drylng temperature:80-160℃
Dry heat capacity:9/12/15/24/32kw
Heating capacity:6.6/7.5/7.5/12/18kw

Quantity:
ModelNSW-300NSW-600NSW-1000NSW-1300NSW-1500
The average dew point≤-40℃
Drying cylinder capacity(L) 300600100013001500
The drylng temperature(℃) 80-160
Honeycomb wheel maximum air volume(m³/h) 200300400500700
Dry air blowerThe output power(kw)1.752.25.57.51.1
Regeneration of the fanThe output power(kw)0.750.750.751.752.2
Dry heat capacity(kw)912152432
The heating capacity(kw)6.67.57.51218
Honeycomb wheel motor(w) 4040909090
Drying hopper capacity(L) 914183636
Molding machine hopper capacity(L) 6991818
 The temperature regulatorAdjust the actionHeating and cooling PID action±1℃
The InputK (CA) type thermocouple
Sat the displayDigital setting, digital display, set temperature SV1 / SV2 (memory function)
Electrical control modeMicrocomputer control
Alarm functionPower reverse phase, motor overload, over-temperature alarm, poor ripening, abnormal regeneration and exchange
Fan power transmission(kw) 1.51.52.22.22.2
Dust collection wayDust filter for barrel filter
Long(mm)15001880228027002800
Wide(mm) 10001100196024002500
High(mm) 22002400288035003680
Weight (kg) 350450600600680



Features:

1. The special dehumidification and drying equipment system for extrusion line adopts precise P.LD. electronic temperature control to achieve uniform drying effect;
2. The double cooler structure of the special dehumidification and drying equipment system for the extrusion line ensures lower return air temperature and dew point;
3. The optimized design of the special dehumidification and drying equipment system for the extrusion line is convenient for maintenance;
4. The air inlet and air outlet of the special dehumidification and drying equipment system for extrusion line are adjustable design, which can easily adjust the air volume;
5. The stainless steel material hopper of the special dehumidification and drying equipment system for the extrusion line can prevent the pollution of raw materials during the dehumidification and drying process;
6. The special dehumidification and drying equipment system for extrusion line is equipped with ultra-low temperature protector to avoid agglomeration of raw materials; equipped with motor overload protection;

7. The special dehumidification and drying equipment system of the extrusion line is equipped with a manual discharge valve, which can avoid agglomeration of raw materials.
8. Dehumidification and drying equipment system for extrusion line can be equipped with PLC control and LCD touch-type human-machine interface; dew point meter can be selected to monitor dehumidification effect
9. Special dehumidification and drying equipment system for extrusion line. When the drying air temperature is low (such as processing PET-G), a cooler can be added at the outlet of the drying air.


Company Profile

After more than ten years of development, NDT Machinery Co., Ltd. has become a scientific and technological innovative enterprise integrating R & D, design, production, sales and maintenance. At present, the company has two manufacturing factories, and has established branches in Shanghai, Nanjing, Tianjin, Chengdu, Chongqing, Wuhan, Shenzhen, Xiamen and other places.

 

Our company will adhere to the concept of "low cost and high performance" to provide customers with high-quality products and after-sales services. Our products are widely used in food containers, medicine, optics, cosmetics, sanitary ware, home appliances, communications, IT, automotive, and desert , Cellulose, fiber, etc. And we are expanding into new fields such as large-capacity lithium batteries, fuel cells, solar cells and chemical reactors.


Main products for our company-NDT Machinery Co., Ltd

Temperature control series: water-type mold temperature machine, oil-type mold temperature machine, 350 ℃ ultra-high temperature oil temperature machine, 180 ℃ ultra-high temperature water temperature machine, dual-machine integrated mold temperature machine, integrated cold and hot machine, anti-fine mold temperature machine, etc

 

Refrigeration equipment series: Industrial chiller, laser chiller, PCB chiller, electroplating oxidation chiller, low temperature chiller, screw chiller, laser equipment and NC machine tool special cooler, design and construction of factory centralized water supply system.

 

Plastic dehumidification and drying series: injection molding standard front nest wheel dehumidification and drying conveyor integrated machine, film and sheet blowing bottle, optical disc and light-seeking plate and other optical products, special dehumidification and drying equipment, large pre-dehumidified dehumidifier dryer equipment for hygroscopic materials such as PET, PC. PA PLA and PMMA.


Material conveying series: automatic feeder, dust feeder, screw feeder, single material centralized feeding system, dust separation system and material metering and mixing system.

 

Recycling and crushing series: plastic crusher, large-scale centralized crushing equipment, peripheral automatic crusher, etc.

 

Our company is willing to work together with customers to move towards a green, low-carbon, labor-saving, economical and rational future for plastic molding with good credit, high-quality products and perfect services .

 

Contact information

Tel:+8618550003508

       +86051268017763

Email:Fancy@ndetated.com

Fax: +86051268017793

Whatsapp:+8618068000020



Product Inquiry

Contact Us

KEEP IN TOUCH

 NO.188 danghu road,linhu town,wuzhong district,suzhou city,jiangsu province,China.
 +86-18550003508
 Mobile:  +86-0512-68017763

 Fancy@ndetated.com
 FAX:  +86-0512-68017793
 WHATSAPP:  +86-18068000020

SUBSCRIBE

© 2019 NDT Machinery (Suzhou)Co.,Ltd. All rights reserved.