|Thermal insulation material||Glass Wool &Outer Jacket|
|Dry air volume||m²/h||40||80||120||180||280|
|Drying fan||Motor power||KW||0.22||0.38||0.9||1.5||2.2||1.5|
|Regenerative blower||Motor power||W||50||94||94||130|
|Drying heater||Capacity||200V||1 kw||2.1kw||4kw||6kw||7.5kw||12.4kw|
|Drying heater||Capacity||200V||1 kw||1.41kw||2.4kw||3kw||5.8kw||9kw|
|380V||1.2kw||1.71 kw||7kw||10.9 kw|
|Desiccant method||Honeycomb rotor|
|Honeycomb rotor||Motor power||W||15||25||40|
|Conveying fan||Motor output||Kw||1.1||3|
|Temp.corrtrol control||PID Control|
|Alarm protection circuit||Over heat (Drying , regeneration) / Motor overload|
|Reverse phase protection of motor /Stop time delay|
1. Conveying integrated dehumidifying dryer integrates three functions of dehumidifying, drying and conveying in one.
2.The conveyor integrated dehumidifier dryer is a three-machine integrated dehumidifier drying feed combination, which is equipped with a honeycomb runner, which can obtain low-dew point dry air with good stability, resulting in two types: semi-open and fully enclosed
3.The feeding system of the integrated dehumidifying dryer is equipped with a cutting valve to ensure that there is no residual raw material in the material pipe.
4. Conveying integrated dehumidification dryer is equipped with microcomputer control as standard equipment
5. The optical-grade model of the integrated dehumidifier dryer is equipped with a power distribution eye hopper, which can remove fine powder from the raw materials. In the formation of optical-grade products, it can avoid the generation of stains.
6. All the raw material contact surfaces of the optical-grade model of the conveyor integrated dehumidifier dryer are polished by stainless steel mirror, and are equipped with a closed loop feeding system. Prevents contamination or re-wetting of raw materials
7. The optical-grade model of the integrated dehumidification dryer is equipped with a high-efficiency filter as standard inside the system, which can effectively filter fine dust ions up to 0.3um, and the filter reaches 99.995%.
8. Conveying integrated desiccant dryer. The heat-preserving drying bucket adopts a lower blower tube design and is equipped with a cyclone exhaust device to prevent heat loss, ensure temperature and improve drying efficiency.
9. Conveying integrated dehumidification dryer. This series of dehumidification system adopts double cooler to plum, ensuring lower return air temperature and dew point.
After more than ten years of development, NDT Machinery Co., Ltd. has become a scientific and technological innovative enterprise integrating R & D, design, production, sales and maintenance. At present, the company has two manufacturing factories, and has established branches in Shanghai, Nanjing, Tianjin, Chengdu, Chongqing, Wuhan, Shenzhen, Xiamen and other places.
Our company will adhere to the concept of "low cost and high performance" to provide customers with high-quality products and after-sales services. Our products are widely used in food containers, medicine, optics, cosmetics, sanitary ware, home appliances, communications, IT, automotive, and desert , Cellulose, fiber, etc. And we are expanding into new fields such as large-capacity lithium batteries, fuel cells, solar cells and chemical reactors.
Main products for our company-NDT Machinery Co., Ltd
Temperature control series: water-type mold temperature machine, oil-type mold temperature machine, 350 ℃ ultra-high temperature oil temperature machine, 180 ℃ ultra-high temperature water temperature machine, dual-machine integrated mold temperature machine, integrated cold and hot machine, anti-fine mold temperature machine, etc
Refrigeration equipment series: Industrial chiller, laser chiller, PCB chiller, electroplating oxidation chiller, low temperature chiller, screw chiller, laser equipment and NC machine tool special cooler, design and construction of factory centralized water supply system.
Plastic dehumidification and drying series: injection molding standard front nest wheel dehumidification and drying conveyor integrated machine, film and sheet blowing bottle, optical disc and light-seeking plate and other optical products, special dehumidification and drying equipment, large pre-dehumidified dehumidifier dryer equipment for hygroscopic materials such as PET, PC. PA PLA and PMMA.
Material conveying series: automatic feeder, dust feeder, screw feeder, single material centralized feeding system, dust separation system and material metering and mixing system.
Recycling and crushing series: plastic crusher, large-scale centralized crushing equipment, peripheral automatic crusher, etc.
Our company is willing to work together with customers to move towards a green, low-carbon, labor-saving, economical and rational future for plastic molding with good credit, high-quality products and perfect services .