In the injection molding process, mold temperature affects surface quality, fluidity, shrinkage, injection cycle and deformation. The main purpose of controlling the mold temperature is to heat the mold to the working temperature and to keep the mold temperature constant at the operating temperature. If the above two points are successful, the cycle time can be optimized and it will ensure the high quality of the injection molded parts.
The mold temperature machine is composed of a water tank, a heating and cooling system, a power transmission system, a liquid level control system, a temperature sensor, and an injection port.Typically, the pump in the power transmission system causes the hot fluid to reach the mold from the tank containing the built-in heater and cooler, and then return from the mold to the tank.The temperature sensor measures the temperature of the hot fluid and transmits the data to the controller of the control section. The controller adjusts the temperature of the hot fluid to indirectly adjust the temperature of the mold.If the mold temperature is in production and the temperature of the mold exceeds the set value of the controller, the controller opens the solenoid valve to open the inlet pipe until the temperature of the hot liquid, that is, the temperature of the mold returns to the set value. If the mold temperature is lower than the set value, the controller turns on the heater.
  Petroleum and chemical industry: 
Polymerization, condensation, distillation, melting, dehydration, forced insulation.
 Oil industry:
Fatty acid distillation, oil decomposition, concentration, esterification, reactor heating.
 Synthetic fiber industry: 
Polymerization, melting, spinning, stretching, drying.
 Textile printing and dyeing industry:
Heat setting roller heating, drying room heating, dyeing
 Feed industry:

 Plastics and rubber industry:
Accurately control the mold temperature of various plastic processing, shorten the cycle and ensure the stability of product quality. Hot pressing, calendering, extrusion, vulcanization molding.
 Paper industry: 
Dry, corrugated paper processing.

 Wood industry:
Plywood, fiberboard press forming, laminate heating, hot plate heating, hydraulic press temperature control, wood drying.
Forest industry: hot pressing, drying, wood-based panels, medium density fiberboard, particleboard, oriented strand board, wheat straw board, plywood, wood panel finish, wood processing, wood, solid wood flooring, wood drying, wood products, furniture, solid wood flooring
Paper printing industry: corrugated board processing, paper processing, ink production processing, hot melting, drying
 Building materials work:
Supply chilled water for concrete, make the concrete molecular structure suitable for construction purposes, and effectively enhance the hardness and toughness of concrete. Gypsum board drying, asphalt heating, concrete component maintenance.
 Mechanical industry:
Control the pressure temperature of the oil pressure system and stabilize the oil temperature and oil pressure. Extend oil use time, improve mechanical lubrication efficiency and reduce wear. Spray paint, printing and drying.
 Food industry:
It is used for rapid cooling after food processing to adapt to packaging requirements. There is also a temperature for controlling the fermented food. The oven is heated and the sandwich pan is heated.Food industry: used for rapid cooling after food processing to adapt to packaging requirements. In addition, the temperature of the fermented food can be controlled. The oven can beheated and the sandwich pan can be heated.
 Air conditioning industry: 
Industrial plants and civil buildings for heating.
 Road construction industry: 
Asphalt melting, insulation.
 Light industry:
Production of ink and washing powder.
 Light chemical  industry:
Polymerization, condensation reaction, distillation, rectification, concentration, evaporation, melting
 Petrochemical industry:
Synthesis, reaction, distillation, rectification, heating, heat preservation, storage tank heating, heavy oil heating
 Leather industry:
Artificial leather processing
 Paint industry:
Paint baking, drying, high temperature solid melting, home appliances, vehicle baking paint, painting
 Automobile aircraft industry:
Painting baking, drying, thermoforming, high temperature bonding
 Asphalt heating:
Asphalt heating, melting
 Atomic energy industry:
Nuclear Fuel Processing
 Electrical industry:
Stabilize the molecular structure inside the production line of electronic components and improve the qualification rate of electronic components. It can be applied to the ultrasonic cleaning industry to effectively prevent the damage caused by the volatilization and volatilization of expensive cleaning agents. Resin impregnation, dissolution, heat preservation.
 Electroplating industry:
Control plating temperature, increase the density and smoothness of plating parts, shorten plating cycle, improve production efficiency, improve product quality, galvanize, chrome plating, silver plating.

Related Products

Product Inquiry


 NO.188 danghu road,linhu town,wuzhong district,suzhou city,jiangsu province,China.
 Mobile:  +86-0512-68017763
 FAX:  +86-0512-68017793
 WHATSAPP:  +86-18068000020


© 2019 NDT Machinery (Suzhou)Co.,Ltd. All rights reserved.