Ndetated Water Heated Mold Temperature Controller Machine

Temperature control accuracy:PID±1℃
Power Supply:AC3 380V 50HZ 3P E
Heat transfer media:Water
Operating temperature:150℃ or 180℃
Cooling Way:Indirect cooling





Operating temperature150℃180℃
Temperature control precisionPID±1℃PID±1℃
Power Supply50HZAC3 380V 50HZ 3PEAC3 380V 50HZ 3PE
Heat transfer media/WaterWater
Cooling Way/Indirect coolingIndirect cooling
Heating energyKW9122491224
Pump horsepowerKW0.751.52.20.751.53
The Maximum Pump folwL/MIN8611018386110235
The Maximum Pump pressureKG/CM23.
Maximum power consumptionKW1013.526.21013.527
Alarm functions/Missing phase/lack of water/over temperature/overload
Cooling water pipingINCH 1/2
Circulation water pipingINCH3/8x4


1. Water mold temperature machine imported temperature control device.It is fully automatic control, automatic calculation and its temperature control accuracy is± 1 °C, microcomputer programming control and is easy to understand.

2.The water mold temperature machine adopt advanced components, low energy consumption water pump, long service life, low noise, low vibration, temperature control range 40-180 °C

3. The temperature of the water-type mold temperature riser is fast, the temperature is accurate and stable, and the unique dual-power heating design is suitable for use in different temperature-controlled places. The energy saving effect is obvious.

4. The water mold temperature machine is integrally formed, and the pipe loss is small, the heating is uniform, and the whole anti-rust and anti-corrosion treatment is used, which is safe and long-term use.

5. Water mold temperature machine has automatic exhaust function at startup, mold return water temperature detection table, safety protection and fault indication system

6.This series of products are widely used in various industries such as plastic molding, light guide plate die casting, rubber tires, rollers, chemical reaction kettles, bonding, compaction and other industries, which can improve the molding efficiency of products, reduce the occurrence of defective products, and increase the Appearance, suppress product defects, speed up production schedule, reduce energy consumption, save energy.

7. Full intelligent temperature control system, the unit is designed to run 24 hours without stopping.

Company Profile

After more than ten years of development, NDT Machinery Co., Ltd. has become a scientific and technological innovative enterprise integrating R & D, design, production, sales and maintenance. At present, the company has two manufacturing factories, and has established branches in Shanghai, Nanjing, Tianjin, Chengdu, Chongqing, Wuhan, Shenzhen, Xiamen and other places.


Our company will adhere to the concept of "low cost and high performance" to provide customers with high-quality products and after-sales services. Our products are widely used in food containers, medicine, optics, cosmetics, sanitary ware, home appliances, communications, IT, automotive, and desert , Cellulose, fiber, etc. And we are expanding into new fields such as large-capacity lithium batteries, fuel cells, solar cells and chemical reactors.

Main products for our company-NDT Machinery Co., Ltd

Temperature control series: water-type mold temperature machine, oil-type mold temperature machine, 350 ℃ ultra-high temperature oil temperature machine, 180 ℃ ultra-high temperature water temperature machine, dual-machine integrated mold temperature machine, integrated cold and hot machine, anti-fine mold temperature machine, etc


Refrigeration equipment series: Industrial chiller, laser chiller, PCB chiller, electroplating oxidation chiller, low temperature chiller, screw chiller, laser equipment and NC machine tool special cooler, design and construction of factory centralized water supply system.


Plastic dehumidification and drying series: injection molding standard front nest wheel dehumidification and drying conveyor integrated machine, film and sheet blowing bottle, optical disc and light-seeking plate and other optical products, special dehumidification and drying equipment, large pre-dehumidified dehumidifier dryer equipment for hygroscopic materials such as PET, PC. PA PLA and PMMA.

Material conveying series: automatic feeder, dust feeder, screw feeder, single material centralized feeding system, dust separation system and material metering and mixing system.


Recycling and crushing series: plastic crusher, large-scale centralized crushing equipment, peripheral automatic crusher, etc.


Our company is willing to work together with customers to move towards a green, low-carbon, labor-saving, economical and rational future for plastic molding with good credit, high-quality products and perfect services .


Contact information



Fax: +86051268017793


Product Inquiry

Product Category

Contact Us


 NO.188 danghu road,linhu town,wuzhong district,suzhou city,jiangsu province,China.
 Mobile:  +86-0512-68017763
 FAX:  +86-0512-68017793
 WHATSAPP:  +86-18068000020


© 2019 NDT Machinery (Suzhou)Co.,Ltd. All rights reserved.